(+34) 93 57 95 415 
Request Information 
Description
Rectangular electromagnets (IMAREC)
Its operation is very simple: when the current is activated, a magnetic field is generated which is concentrated in the iron armature, thus allowing any type of fastening.
Characteristics:
Degree of protection: IP65
Thermal class: B (130º)
Rated voltage: 24V DC
Standard duty cycle: ED 100%
Other voltages, ED and sizes: Please consult us.
The attraction and clamping of the ferromagnetic parts is obtained by the excitation of the internal winding of the suction cup. When the power supply ceases, the retained workpiece is released. When working with suspended loads, the relevant safety regulations must be observed.
The standard electrical connection is made by means of a connector, but it can also be supplied with a cable, the connector or cable connection can be configured in different ways, the standard configuration is as shown in the enclosed drawing.
The underside of the device has threaded holes (M-6/M-8) for fixing.
The following table gives the values of the holding force (Fm) as a function of the air gap (δL), measured under the following conditions:
- Direct current (DC) power supply.
- Flat piece (3μ roughness) in AºSt37, of the thickness indicated in the table and dimensions equal to or greater than the attraction face.
- Ambient temperature of 35ºC.
- Coil stabilised at its operating temperature.
For other conditions of use, the force (Fm) may decrease.
| Model | Code | P a 20ºC (W) | e (mm) | Air gap (mm) δL | ||||
| 0 | 0.1 | 0.2 | 0.5 | 1 | ||||
Magnetic Forces Fm (N) | ||||||||
| IMAREC 100/35 | ELEE00031 | 10 | 1 | 32 | 22 | 12 | 8 | 6 |
| 3 | 396 | 308 | 120 | 45 | 8 | |||
| 6 | 604 | 320 | 190 | 52 | 12 | |||
| 10 | 752 | 468 | 238 | 60 | 18 | |||
| IMAREC 150/35 | ELEE00029 | 14 | 1 | 65 | 50 | 30 | 21 | 14 |
| 3 | 769 | 580 | 220 | 82 | 17 | |||
| 6 | 1090 | 657 | 368 | 90 | 21 | |||
| 10 | 1450 | 904 | 490 | 116 | 35 | |||
| IMAREC 200/35 | ELEE00030 | 18 | 1 | 80 | 60 | 42 | 28 | 14 |
| 3 | 928 | 720 | 260 | 94 | 20 | |||
| 6 | 1400 | 810 | 460 | 121 | 27 | |||
| 10 | 1758 | 1108 | 690 | 136 | 46 | |||
| IMAREC 400/35 | ELEE00333 | 30 | 1 | 172 | 131 | 91 | 60 | 35 |
| 3 | 2100 | 1460 | 537 | 210 | 45 | |||
| 6 | 3060 | 1722 | 962 | 263 | 60 | |||
| 10 | 3810 | 2371 | 1297 | 304 | 93 | |||
| IMAREC 500/35 | ELEE00444 | 45 | 1 | 210 | 150 | 100 | 60 | 36 |
| 3 | 2323 | 1806 | 674 | 234 | 56 | |||
| 6 | 3540 | 2100 | 1114 | 295 | 70 | |||
| 10 | 4423 | 2745 | 1501 | 330 | 117 | |||
| IMAREC 600/35 | ELEE00006 | 53 | 1 | 226 | 173 | 90 | 66 | 40 |
| 3 | 2653 | 2053 | 706 | 266 | 66 | |||
| 6 | 4053 | 2266 | 1286 | 346 | 80 | |||
| 10 | 5026 | 3120 | 1806 | 400 | 120 | |||
| IMAREC 150/60 | ELEE00004 | 25 | 1 | 140 | 112 | 102 | 75 | 50 |
| 3 | 780 | 680 | 600 | 445 | 200 | |||
| 6 | 1800 | 1490 | 1100 | 610 | 200 | |||
| 10 | 1900 | 1500 | 1250 | 650 | 210 | |||
| IMAREC 200/60 | ELEE00049 | 40 | 1 | 205 | 165 | 155 | 116 | 72 |
| 3 | 1130 | 990 | 890 | 680 | 290 | |||
| 6 | 2750 | 2300 | 1800 | 884 | 280 | |||
| 10 | 2760 | 2160 | 1870 | 900 | 300 | |||
| IMAREC 500/60 | ELEE01428 | 75 | 1 | 553 | 440 | 397 | 310 | 190 |
| 3 | 3150 | 2630 | 2320 | 1800 | 78 | |||
| 6 | 7250 | 5870 | 4650 | 2380 | 850 | |||
| 10 | 7450 | 5950 | 4820 | 2410 | 910 | |||
e (mm): thickness of the piece to hold
Standard sizes: 
| Model | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | F (mm) | H (metric) | Nº holes | Weight (kg) | Stg.(kg) | Stg.(N) | Cable- gland |
| IMAREC 40/20 | 40.3 | 20±0.3 | 20±0.1 | 11 | 18 | 10 | M-4 | 2 | 0.09 | 5.5 6 9.1 112 | 55 60 91 1120 | CABLE |
| IMAREC 60/30 | 60 | 30±0.3 | 30±0.1 | 15 | 30 | 10 | M-8 | 2 | 0.34 | 7.4 33.6 51.7 52.5 | 74 336 517 525 | CABLE |
| IMAREC 100/35 | 125 | 35±0.3 | 34±0.1 | 25 | 50 | 10 | M-6 | 2 | 0.9 | 3.2 39.6 60.4 75.2 | 32 396 604 752 | PG-9 |
| IMAREC 100/50 | 100 | 50±0.3 | 40±0.1 | 25 | 50 | 10 | M-8 | 2 | 1.26 | 12.3 66 173.7 195.5 | 123 660 1737 1955 | CABLE |
| IMAREC 150/35 | 175 | 35±0.3 | 34±0.1 | 25 | 50 | 10 | M-6 | 3 | 1 | 6.5 76.9 109 145 | 65 769 1090 1450 | PG-9 |
| IMAREC 200/35 | 225 | 35±0.3 | 34±0.1 | 25 | 50 | 10 | M-6 | 4 | 1.5 | 8 92.8 140 175.8 | 80 928 1400 1758 | PG-9 |
| IMAREC 400/35 | 425 | 35±0.3 | 34±0.1 | 25 | 50 | 12 | M-6 | 8 | 2.8 | 17.2 210 306 381 | 172 2100 3600 3810 | PG-9 |
| IMAREC 500/35 | 525 | 35±0.3 | 34±0.1 | 25 | 50 | 12 | M-6 | 10 | 3.5 | 21 232.3 354 442.3 | 210 2323 3540 4423 | PG-9 |
| IMAREC 600/35 | 625 | 35±0.3 | 34±0.1 | 25 | 50 | 12 | M-6 | 12 | 4.5 | 22.6 265.3 405.3 502.6 | 226 2653 4053 5026 | PG-9 |
| IMAREC 150/60 | 180 | 60±1 | 49.5±0.1 | 40 | 70 | 12 | M-8 | 2 | 2.3 | 14 78 180 190 | 140 780 1800 1900 | PG-11 |
| IMAREC 200/60 | 230 | 60±1 | 49.5±0.1 | 40 | 120 | 12 | M-8 | 2 | 3 | 20.5 113 275 276 | 205 1130 2750 2760 | PG-11 |
| IMAREC 500/60 | 530 | 60±1 | 49.5±0.1 | 70 | 120 | 12 | M-8 | 2 | 7.8 | 55.3 315 725 745 | 553 3150 7250 7450 | PG-11 |
*On request, they can be manufactured for any size, voltage, gear factor, etc.
Remarks:
On disconnection the remanence can reach values of up to 10% of the force.
Earthing is recommended if metal parts are accessible.
Ordering designation:
Size; Voltage; Duty factor
Example: Order No.: ERM150/35 24 Vdc 100%.
C.E.- The products comply with low voltage standards 73/23 EEC. Compliance with 89/366 EEC electromagnetic compatibility standards must be ensured by the user.
When used for lifting and handling loads a minimum safety factor of 3 must be chosen, the weight of the load must be at least one third of the holding force.
Fields of application:
This type of electromagnet is used in industrial robotics for the positioning of parts, transport installations, etc….