DRT 960W Power Supply - For IMA Electromagnets

DRT 960W Three Phase

Three Phase AC 340 ~ 550V wide range input
High efficiency 91% and low dissipation
Protections: Short circuit / Overload / Over voltage / Over temperature
Optional parallel function (1+1)
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 o 15
UL 508 (Industrial control equipment) approved
EN61000-6-2 (EN50082-2) industrial immunity level
100% full load burn-in test
3 years warranty

Out of stock

Description

960W Three Phase Industrial DIN RAIL Power Supply

MODEL		DRT-960-24	DRT-960-48
OUTPUT	DC VOLTAGE	24V	48V
	RATED CURRENT	40A	20A
	CURRENT RANGE	0~40A	0~20A
	RATED POWER	960W	960W
	RIPPLE & NOISE (max) *2	80mVp-p	80mVp-p
	VOLTAGE ADJ. RANGE	24~28V	48~55V
	VOLTAGE TOLERANCE *3	±1.0%	±1.0%
	LINE REGULATION	±0.5%	±0.5%
	LOAD REGULATION	±0.5%	±0.5%
	SETUP, RISE TIME	200ms, 60ms/400VAC – 200ms, 60ms/VAC at full load
	HOLD UP TIME	14ms/400VAC – 30ms/500VAC at full loaded
INPUT	VOLTAGE RANGE	Three-Phase 340 – 550 VAC (Dual phase operation possible in connecting L1, L3, FG)*5
	FREQUENCY RANGE	47~63Hz
	EFFICIENCY (Typ.)	91%	92%
	AC CURRENT (Typ.)	2A/400VAC – 1.6A/500VAC
	INRUSH CURRENT (max)	COLD START 50A
	LEAKAGE CURRENT	<3.5Ma/530VAC
PROTECTION	OVERLOAD	105~125% rated output power
		Protection type: Constant current limiting, unit will shut down o/p voltage after 3 sec. Re-power on to recover
	OVER VOLTAGE	30~36V	59~66V
		Protection type: Shut down o/p voltage. Re-power on to recover
	OVER TEMPERATURE	Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONNEMENT	WORKING TEMP.	-20~+60ºC (Refer to “Derating Curve”)
	WORKING HUMIDITY	20~90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40~+85ºC, 10~95 RH non-condensing
	TEMP. COEFFICIENT	±0.03%/ºC (0~50ºC)
	VIBRATION	Component:10~500Hz, 2G 10min/1cycle, 60min each along X, Y, Z axes; Mounting: Compilance to IEC 60068-2-6
SAFETY & EMC	SAFETY STANDARDS	UL508, UL60950-1, TUV EN60950-1, EAC TP TC 004 approved
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500 VDC / 25ªC / 70% RH
	EMC EMISSION	Compilance to EN55011 (CISPR11), EN55032 (CISPR32), EN61204-3 Class B, EN61000-3-2,-3, EAC TP TC 020
	EMC IMMUNITY	Compilance to EN61000-4-2,3,4,5,6,8,11, EN61204-3, EN61000-6-2 (EN50082-2), heavy indutry level, criteria A, EAC TP TC 020
OTHERS	MTBF	122.5K hrs min. MIL-HDBK-217F (25ªC)
	DIMENSION	276125,2100mm (WHD)
	PACKING	3.3Kg; 4pcs/14,2Kg/1.14CUFT
NOTE	*1 All parameters NOT specially mentioned are measured at 400VAC input, rated load and 25ºC of ambient temperature
	*2 Ripple & Noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
	*3 Tolerance: includes set up tolerance, line regulation and load regulation.
	*4 The power supply is considered a component which will be installed into a final equipment. It must be re-confirmed that it still mets EMC directives
	*5 Dual phase operation (connecting L1, L3, FG) is allowed under certan derating to output load. Please refer to the derating curves for details
	*6 The ambient temperature derating of 3.5ºC/1000m with fanless models and of 5ºC/1000m with fan models for operating altidude higher than 2000m(6500ft)

Reviews

There are no reviews yet.

Be the first to review “DRT 960W Three Phase”