Technical specifications:
- Correction time 1 000v/sec
- RISC microprocessor control
- Wide input voltage working range, 130-260 VAC
- Electronic protection against overload, and short circuit
- 220 VAC ± 3regulation
- Charge level, output and input indicator
- Protection against excessive voltage up-down limits
- The IMA static stabilizer is used when the operating speed represents a critical load problem.
- The voltage stabilizer does not provide galvanic separation between input and output.
- High performance
SINGLE PHASE SPECIFICATIONS | ||||||||||||
Kva power | 5 | 7.5 | 10 | 15 | 20 | 25 | 30 | 40 | 50 |
FEEDING | |||||||||||||
Voltage | 160-250 v | ||||||||||||
Maximum margin | |||||||||||||
Frequency | 47-65 Hz | ||||||||||||
Protection | Magneto thermic | ||||||||||||
Intensity | 24 | 36 | 48 | 72 | 96 | 120 | 144 | 192 | 240 |
UTILIZATION | |||||||||||||
Voltage | 220 VAC RMS ±3% | ||||||||||||
Overload | 200% 10 seg. 500% 20 ms | ||||||||||||
Correction time | 1.000v / seg | ||||||||||||
Power factor | 0,8 (1 optional) | ||||||||||||
Protection | ELECTRONIC SHORT CIRCUIT, VOLTAGE, CURRENT | ||||||||||||
Output intensity | 18 | 27 | 36 | 54 | 72 | 90 | 108 | 144 | 180 |
SYSTEM | Fully static microprocessor-controlled | ||||||||||||
COMMON CHARACTERISTICS | |||||||||||||
Ventilation | Natural with thermostat | ||||||||||||
Visualizer | Digital (input and output volts) | ||||||||||||
Efficiency | >97% | ||||||||||||
Bypass | Manual | ||||||||||||
Cabinet protection | IP-20 (optional IP-54) | ||||||||||||
Working temperature | 50ºC | ||||||||||||
Storage | -25º + 60ºC | ||||||||||||
Relative humidity | 90% non-condensing | ||||||||||||
Maximum altitude | <2.000m | ||||||||||||
Acoustic level | <50dB | ||||||||||||
Certification | CE/TUV Austria Hellas (ISO 9001) |
Dimensions (cm) | 54x26x39 | 35x59x42 | 86x50x52 |
Height / Width / Depth | |||
Weight (kg) | 30/33/38 | 50/55/63 | 65/80/85 |
Recent Comments