REQUEST INFORMATION AND CATALOG
REQUEST INFORMATION AND CATALOG
Rectangular Electromagnet (IMAREC)

Rectangular Electromagnet (IMAREC)

This type of electromagnets are made with ferrous alloys and operate at 24 V DC. On request, can also be manufactured into alternating current. Its operation is very simple: when current is activated, a magnetic field is concentrated in iron armor is generated, allowing any kind of support.
Description

Rectangular electromagnets (IMAREC)

Its operation is very simple: when the current is activated, a magnetic field is generated which is concentrated in the iron armature, thus allowing any type of fastening.

Characteristics:

Degree of protection: IP65
Thermal class: B (130º)
Rated voltage: 24V DC
Standard duty cycle: ED 100%
Other voltages, ED and sizes: Please consult us.

The attraction and clamping of the ferromagnetic parts is obtained by the excitation of the internal winding of the suction cup. When the power supply ceases, the retained workpiece is released. When working with suspended loads, the relevant safety regulations must be observed.

The standard electrical connection is made by means of a connector, but it can also be supplied with a cable, the connector or cable connection can be configured in different ways, the standard configuration is as shown in the enclosed drawing.

The underside of the device has threaded holes (M-6/M-8) for fixing.

The following table gives the values of the holding force (Fm) as a function of the air gap (δL), measured under the following conditions:

  • Direct current (DC) power supply.
  • Flat piece (3μ roughness) in AºSt37, of the thickness indicated in the table and dimensions equal to or greater than the attraction face.
  • Ambient temperature of 35ºC.
  • Coil stabilised at its operating temperature.

For other conditions of use, the force (Fm) may decrease.

 

Model Code P a 20ºC (W) e (mm) Air gap (mm) δL
0 0.1 0.2 0.5 1

Magnetic Forces Fm (N) 
IMAREC 100/35 ELEE00031 10 1 32 22 12 8 6
3 396 308 120 45 8
6 604 320 190 52 12
10 752 468 238 60 18
IMAREC 150/35 ELEE00029 14 1 65 50 30 21 14
3 769 580 220 82 17
6 1090 657 368 90 21
10 1450 904 490 116 35
IMAREC 200/35 ELEE00030 18 1 80 60 42 28 14
3 928 720 260 94 20
6 1400 810 460 121 27
10 1758 1108 690 136 46
IMAREC 400/35 ELEE00333 30 1 172 131 91 60 35
3 2100 1460 537 210 45
6 3060 1722 962 263 60
10 3810 2371 1297 304 93
IMAREC 500/35 ELEE00444 45 1 210 150 100 60 36
3 2323 1806 674 234 56
6 3540 2100 1114 295 70
10 4423 2745 1501 330 117
IMAREC 600/35 ELEE00006 53 1 226 173 90 66 40
3 2653 2053 706 266 66
6 4053 2266 1286 346 80
10 5026 3120 1806 400 120
IMAREC 150/60 ELEE00004 25 1 140 112 102 75 50
3 780 680 600 445 200
6 1800 1490 1100 610 200
10 1900 1500 1250 650 210
IMAREC 200/60 ELEE00049 40 1 205 165 155 116 72
3 1130 990 890 680 290
6 2750 2300 1800 884 280
10 2760 2160 1870 900 300
IMAREC 500/60 ELEE01428 75 1 553 440 397 310 190
3 3150 2630 2320 1800 78
6 7250 5870 4650 2380 850
10 7450 5950 4820 2410 910

e (mm): thickness of the piece to hold

Standard sizes:

Model A (mm) B (mm) C
(mm)		 D (mm) E (mm) F (mm) H  (metric) Nº
holes		 Weight (kg) Stg.(kg) Stg.(N) Cable-
gland
IMAREC

40/20

 40.3 20±0.3 20±0.1 11 18 10 M-4 2 0.09 5.5
6
9.1
112		 55
60
91
1120		 CABLE
IMAREC

60/30

 60 30±0.3 30±0.1 15 30 10 M-8 2 0.34 7.4
33.6
51.7
52.5		 74
336
517
525		 CABLE
IMAREC

100/35

 125 35±0.3 34±0.1 25 50 10 M-6 2 0.9 3.2
39.6
60.4
75.2		 32
396
604
752		 PG-9
IMAREC 100/50 100 50±0.3 40±0.1 25 50 10 M-8 2 1.26 12.3
66
173.7
195.5		 123
660
1737
1955		 CABLE
IMAREC

150/35

 175 35±0.3 34±0.1 25 50 10 M-6 3 1 6.5
76.9
109
145		 65
769
1090
1450		 PG-9
IMAREC 200/35 225 35±0.3 34±0.1 25 50 10 M-6 4 1.5 8
92.8
140
175.8		 80
928
1400
1758		 PG-9
IMAREC 400/35 425 35±0.3 34±0.1 25 50 12 M-6 8 2.8 17.2
210
306
381		 172
2100
3600
3810		 PG-9
IMAREC 500/35 525 35±0.3 34±0.1 25 50 12 M-6 10 3.5 21
232.3
354
442.3		 210
2323
3540
4423		 PG-9
IMAREC 600/35 625 35±0.3 34±0.1 25 50 12 M-6 12 4.5 22.6
265.3
405.3
502.6		 226
2653
4053
5026		 PG-9
IMAREC

150/60

 180 60±1 49.5±0.1 40 70 12 M-8 2 2.3 14
78
180
190		 140
780
1800
1900		 PG-11
IMAREC 200/60 230 60±1 49.5±0.1 40 120 12 M-8 2 3 20.5
113
275
276		 205
1130
2750
2760		 PG-11
IMAREC 500/60 530 60±1 49.5±0.1 70 120 12 M-8 2 7.8 55.3
315
725
745		 553
3150
7250
7450		 PG-11

*On request, they can be manufactured for any size, voltage, gear factor, etc.

Remarks:

On disconnection the remanence can reach values of up to 10% of the force.

Earthing is recommended if metal parts are accessible.

Ordering designation:
Size; Voltage; Duty factor
Example: Order No.: ERM150/35 24 Vdc 100%.

C.E.- The products comply with low voltage standards 73/23 EEC. Compliance with 89/366 EEC electromagnetic compatibility standards must be ensured by the user.

When used for lifting and handling loads a minimum safety factor of 3 must be chosen, the weight of the load must be at least one third of the holding force.

Fields of application:

This type of electromagnet is used in industrial robotics for the positioning of parts, transport installations, etc....

View 360º

Click on the image, hold down and turn

Web desarrollada por 
Volcanic Internet
info
magnifiercross
Powered by  GDPR Cookie Compliance
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.