Monophase Servo Motor Stabilizers

The IMA voltage regulator provides the constant voltage that you need, correcting the voltage drops and rises that occur in the electrical network.

Our SVR-voltage regulator works fully automatically establishing the correct voltage without user intervention.

Once the regulator is in operation, the mains voltage is measured continuously, and the necessary adjustment operations of raising or lowering the voltage are carried out automatically, giving your system the constant voltage required for correct operation.

The entire system is controlled by a microprocessor which orders the servomotor to start up to correct the voltage necessary for a stabilized output voltage.

The regulation system is made up of a DC servomotor which provides us with a high starting torque and very high precision, which is why we achieve a response to voltage changes of up to 90 V/s.

This equipment does not produce any type of distortion in the electrical network since there is no commutation.

The SVR regulator provides the following:

• No distortion or interruptions in the waveform.
• High precision in the output voltage < 1%.
• Wide range of input voltage correction, 165-255v
• Other input voltage ranges on request.
• The charge level does not affect the correctness and operation of the equipment.
• Overload protection.
• Automatic disconnection after registering several consecutive overload faults.
• Possibility of programming the limits of min. and max. input voltage as well as the load.
• Protection of the user against negative voltages.
• Protection of the user and the equipment against electric shock.
• The values shown on the display are shown in stabilizer operation and also in bypass.
• Manual transfer to bypass regime without regulation.

Technical characteristics: